Inventory

For Sale
Southwestern Industries Proto Trak DPM 5 Bed Mill with A.G.E. CNC Control

This is a nice machine with Original Paint
The following Service has just been Completed

All new bearings in variable speed head Including New variable speed belt.
Table removed and cleaned.
All oil gallies have been cleaned, flushed, and verified oiling correctly.
Ball screwed cleaned and flushed with new oil.
New rubber lines replaced to ball screws
Mill has been adjusted and calibrated using Southwestern Industries Calibration Fixture, and is ready for Production
Kurt Power Draw Bar

Way covers have been removed for pictures. They will be included with machine.

This is a very nice Mill that runs smooth and quite.

Demo video of operation

Specifications:
Table size – 50″ x 12″
T-slots (number x width x pitch) – 3 x 16mm x 63.5mm
Travel (X, Y, Z axis) – 40″ x 20″ x 24″
Quill diameter – 4.13″
Spindle taper – NMTB 40
Spindle speed range RPM – 160-4000
Spindle center to column face – 20.5″
Spindle motor power – 5 HP
Power requirement, control – 110V, 1P, 15A
Power requirement, machine – 220V, 3P, 60HZ Current,
Full Load Amps – 17.5 FLA
Maximum weight of workpiece – 1760 lbs.
Height of table from bottom of bed – 41″
Maximum spindle nose to table – 24″
Minimum height – 87″ Maximum height – 100″
Width of machine including table – 94″
Length with electric box door closed – 80″
Overall width including full table travel – 136″
Overall length with electrical door open – 105″
Footprint – 24″ x 48.4″
Way surface – dovetail X axis; square ways Y and Z axis
Weight (approximate) net – 4400 lbs.
Weight (approximate) shipping – 4700 lbs.
Drill max capacity – 1″ dia.
Tapping max capacity – 5/8″
Milling max capacity – 5 inch @3″/min

Mill can be loaded on truck or trailer at NO charge

Any Questions please call Brandon