Southwestern Industries Proto Trak DPM 3
Southwestern Industries
Proto Trak DPM 3 Vertical Bed Mill
with A.G.E. 3 CNC Controls
This is a very nice machine with Original Paint
The following Service has just been Completed
All new bearings in variable speed head Including New variable speed belt.
New sleeve and pulley on drive motor.
Table removed and cleaned.
All oil gallies have been cleaned, flushed, and verified oiling correctly.
Ball screwed cleaned and flushed with new oil.
New rubber lines replaced to ball screws
This is a very nice Mill that runs smooth and quite.
Video of machine operation can be shared upon request.
I just had Proto Trak technician , calibrate and adjust machine.
Including a full report of Mill. (see pictures)
S/N-011BF10973
New in 2001
Table size 50″ X 10 ” ~ with 3 t-slots
Travel X-29 / Y-16″ / Z-24.150″
Maximum weight of work piece: 1,320 LBS
Milling head swivels right & left: 90 Degrees
Quill travel: 5″
Spindle taper: #40 N.S.T
(3) power quill feeds: .002; .004; .006 IPR
Distance, center-line of spindle to face of column: 17.3″
Variable spindle speeds 70-4200 RPM
Full 3-axis CNC machining control or hand wheels for manual operation
Precision and ground ball screws installed in table(X), saddle(Y), and column(Z)
5 H.P. spindle drive motor
Approximate Weight: 4,200 Lbs.
Approximate Dimensions: 71″ x 71″ x 84″ H
Equipped With:
Dual floppy disc drives
RS 232 port
NEW Telescoping way covers on Z and Y axis
Leveling pads
Automatic lubrication system
(cleaned,flushed, and filled with new oil)
Torque-Rite power draw bar.
Oiler has been clean ,filled and adjusted.
Any questions please Call Brandon
Machine is powered and can be tested.
Will load on truck or trailer at no charge.