Inventory

Nardini MS1440E Gap Bed lathe.

Lathe is in very good condition.
Lathe has been disassembled,cleaned, and adjusted.
All oils have been drained and flushed and filled with correct oil.
Cross slide screw has .004 backlash and operates smoothly.

Lathe features
Automatic feed disconnect on X and Z axis.
Swing Over Bed: 14″
Swing Over Cross Slide: 7-7/8″
Swing In Gap: 19-3/4″
Distance Between Centers: 40″”
Cross Slide Travel: 8″
Top Slide Travel: 4″
Spindle Speeds: (18) 31.5 to 2500 RPM
Tailstock Quill Diameter: 2″
Tailstock Taper: No. 3 MT
Tailstock Quill Travel: 5-1/8″
Number of Threads: 192
Metric Threads: (45) .40 to 7
Inch Threads: (48) 3.5-42 TPI
Module Threads: (48) .1 to 1.75
Diametral Pitch Threads: (48) 14 to 168
Pitch Of Leadscrew: 4 TPI
Number of Feeds: 192
Longitudinal Feeds, Inch: .0016 to .399 in/rev
Longitudinal Feeds, Metric: .042 to 1.013 mm/rev
Cross Feeds, Inch: .0007 to .0213 in/rev
Cross Feeds, Metric: .019 to .542 mm/rev
Equipped With:
8″ 3 jaw. (Runout checked at .0015″)
10 ” 4 jaw.
Drill chuck
Quick change tool post.
Micrometer stop
Coolant pump system
OSHA approved spindle Guard.